News navigation
-
[2026-08-25]Where are JN series vacuum concentration tanks mainly used
The JN series belongs to the single effect intermittent vacuum pressure reduction and concentration tank, equipped with jacket steam heating, vacuum low-temperature evaporation, condenser, and vapor-liquid separator, which can complete material concentration, solvent condensation and recovery. The material contact area is made of stainless steel, meeting GMP hygiene requirements, suitable for low-
-
[2026-08-18]What is the function of CPG series magnetic stirring batching tank
The CPG series is a magnetic driven, fully enclosed sanitary ingredient tank, with core advantages of replacing traditional mechanical dynamic seals with static seals, zero leakage, and no risk of shaft seal contamination. It meets GMP cleanliness standards and is widely used in pharmaceutical, food and dairy, chemical ingredient, dissolution, and mixing processes.
-
[2026-08-11]What are the application industries of FYG series crystallization tanks
FYG belongs to a multifunctional jacket stirring and crystallization equipment, which can complete cooling crystallization, crystal growth, neutralization, reaction, evaporation and concentration. Its mainstream application areas are as follows:
-
[2026-08-04]What is the WZII series dual effect energy-saving external circulation vacuum concentrator
1、 Basic Definition The WZII dual effect energy-saving external circulation vacuum concentrator belongs to the natural circulation vacuum evaporation equipment. It adopts a dual effect heat exchange+external tube heater+negative pressure evaporation structure, relying on two evaporation to fully recover the waste heat of secondary steam. It is a mainstream low-temperature concentration equi
-
[2026-07-28]What are the characteristics of MVR evaporator
1、 Energy saving advantages 1. No need for continuous steam supply Relying on a compressor to compress secondary steam to increase temperature and pressure, and recovering latent heat of vaporization for circulating heating; After normal operation, there is basically no need for external steam, only a small amount of heat source during the start-up phase.
-
[2026-07-23]What are the advantages of DZ series molecular distillation equipment
The DZ series scraping film molecular distillation equipment relies on a built-in condenser short-range structure and a rotating scraping film system to achieve material separation through the difference in molecular mean free path. It focuses on the mild purification of thermosensitive, high boiling point, and easily oxidizable materials, and has outstanding advantages compared to ordinary vacuum
-
[2026-07-15]What are the application industries of QN series spherical concentrators
1、 Pharmaceutical industry Traditional Chinese med icine: concentrate the water extract and ethanol extract of traditional Chinese medicine materials, and produce the raw materials of traditional Chinese medicine extracts, creams, ass hide glue extracts and oral liquids; Concentrate the liquid to a high viscosity paste with a specific gravity of 1.4; Simultaneous recovery of ethanol, ethan
-
[2026-07-07]Briefly introduce the HDCP heat pump distillation coupled pervaporation membrane device
1、 Definition of Name HDCP is the industry abbreviation for heat pump distillation coupled with pervaporation equipment. It is an integrated continuous chemical purification equipment that deeply integrates steam compression heat pump distillation with pervaporation (PV) membrane separation, specifically designed to solve the problem of azeotropic solvent dehydration.
-
[2026-07-01]What is the working principle of a pure electric low-temperature falling film energy-saving evaporat
This device integrates two core technologies: vacuum falling film evaporation and electrically driven closed heat pump cold and hot cycle. It only uses electrical energy throughout the process and does not require an external steam boiler. It achieves negative pressure low-temperature concentration and recovers the latent heat of secondary steam to save energy. It is divided into three parts: fall
-
[2026-06-22]What industries are MVR evaporators used in
MVR relies on mechanical compression for secondary steam cycle heat exchange, with almost no need for steam generation, low-temperature evaporation, and energy saving. It has two major models: membrane separation MVR (thermosensitive material concentration) and forced circulation MVR (high salt crystallization, easily scaling waste liquid), covering ten core industries:
苏公网安备32058102003098号
Home
WeChat
telephone